Installing a New Panel Lift Door Motor

When purchasing a panel lift door motor, always remember at some time you will need to repair it. Because of this, you will want to purchase a motor that has a good back up with long term sales of spare and other parts. There are many cheap products in the market at affordable prices. They seem to be attractive, but unfortunately, they do not have spare parts when you need to repair them. This means that you will be required to buy an entirely new machine. Therefore as a homeowner, it is essential to do thorough research about the best panel lift door motor before making any purchase. The research will help you buying fake motors that are costly when carrying out renovations.

Before installing a new panel lift door here are some things you should consider, and they will be helpful:

Battery Backup:

There are many things you can do to avoid getting trapped in your garage. Therefore the first thing to do and essential with the panel lift door motor is to install an emergency release mechanism. The release mechanism is mounted at the door. The critical hole should face outwards. Then a steel cable is run from the mechanism towards the motors emergency release lever. In the circumstance that power goes out, you will need to insert your key in the mechanism twist it so that it will turn the steel cable and release the door from the motor.

Even though the emergency release mechanisms are effective, you must leave the comfort of your car or home to unlock the door. You will also have to lift the door by hand, physically. The situation may be difficult when the door is heavy and does not stay in an open position. In this case, therefore, you will need someone to hold the door while moving your car.

A battery backup is another option to avoid getting trapped in the garage. The backup system will power your panel lifter door motor. This will help you to stay comfortable and safe in your car or at home when there is a power outage. You can still access your garage during the power outages. Your panel lifts door motor switches about 220v and can charge your batteries while 220v is on. However, not all motors that accommodate the 24v and most old motors fall under this category.

Motor Door To Use On Specific Doors

There are different panel door lift motors, and they work differently. Therefore based on the manner they open and close, it is crucial to consider this fact when choosing the motor you need and how it is set up. The different types of doors include; Roll-up Doors, Tip-up Doors, Sectional Garage Doors, and Roll-up Doors.

Finally, there are many different lengths of the panel lift motor shafts for doors higher than usual. In case you have extra height door, and you need advise always you can contact the experts for inspecting and measuring your door for new motor price quotes.